Operating The Iswitch System; Using The Footswitch Controls; Tps Mode - Stryker iSwitch Manual De Operación Y Mantenimiento

Operating the iSwitch System

Using Stryker disposable bags (P/N 277-500-100) is
Note
recommended to keep the footswitch clean during use. Contact
your local Stryker representative for ordering information.
The iSwitch system is operated through the controls on the footswitch and the
controls on the receiver.

Using the Footswitch Controls

1. Press the mode button to select which device the footswitch will control.
The footswitch buttons will perform according to the mode selected.

TPS Mode

The Wireless Universal footswitch can be programmed like the
Note
TPS Wired footswitch. Default controls are shown.
Oscillate/Forward
or Reverse
Reverse Reverse
*In Speed Mode, press to select the device. Press and hold to change the
handpiece.
Figure 5: Default controls of the Wireless Footswitch in TPS Mode
11
Select Device*
(SERFAS, TPS, etc.)
High/Low
Forward