The Receiver; Front Panel - Stryker iSwitch Manual De Operación Y Mantenimiento

The Receiver

The receiver connects to the devices that will be controlled by the iSwitch system.
It receives commands sent from the footswitch and routes them to the appropriate
device. The receiver also determines how footswitches are used and which devices
they will control.
The features of the receiver are listed in Figures 2 and 3.
1
2
Figure 2: The receiver front panel

Front Panel

1. Power Switch: Powers on and off the receiver. The switch will illuminate
when the unit is on.
2. Synchronize port 1: Enables a footswitch to work with the receiver
when aligned with the synchronize logo on that footswitch. The
footswitch will be designated as "footswitch 1. "
3. Mode button 1: Selects which device footswitch 1 will control (which
"mode" the footswitch is in). Pressing and holding this button will clear
the Footswitch.
4. Active-device display 1: Displays which device is currently active and
can be controlled by footswitch 1 (which "mode" footswitch 1 is in).
5. Active-device display 2: Displays which device is currently active and
can be controlled by footswitch 2 (which "mode" footswitch 2 is in).
6. Mode button 2: Selects which device footswitch 2 will control (which
"mode" the footswitch is in). Pressing and holding this button will clear
the Footswitch
7. Synchronize port 2: Enables a second footswitch to work with the
receiver when aligned with the synchronize logo on that footswitch. The
footswitch will be designated as "footswitch 2. "
4
3
5
6
7
6