Safety Checks; Periodic Maintenance And Checks - RCM SLALOM Manual De Uso

ENGLISH
1) The sweeper must be inspected by a specialist technician who checks its safety or for any damage or de-
fects in the following cases:
• before it is put into operation
• after modif cations or repairs
• at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order; the inspection must be made by
authorized specialist staff.
To ensure that the safety devices are operating properly , the machine must be overhauled by skilled staf f
every 5 years.
3) The person in charge of the machine must make an annual check on its condition. During this check, he
must decide whether the motor-sweeper still complies with the technical safety regulations, and then apply
a marker plate to the machine to indicate that the check has been made.
P
1
CHECK LEVEL OF ELECTROLYTE IN BATTERIES
2
CHECK CARBON BRUSHES OF DRIVE MOTOR
3
CHECK CARBON BRUSHES OF MAIN BRUSH DRIVING MOTOR
4
CHECK CARBON BRUSHES OF SIDE BRUSH DRIVING MOTOR
5
CHECK THAT THE MAIN BRUSH IS NOT ENTANGLED WITH STRING
6
CHECK DUST FILTER
7
REPLACE DUST FILTER
8
CHECK TRACES OF SIDE BRUSH
9
CHECK THE BELTS TENSION
44
!

SAFETY CHECKS

ERIODIC MAINTENANCE AND CHECKS
8
X
, , .
WIRE ETC X
E ....
VERY HOURS
40 150 500 1500
X
X
X
X
X
X
X