Menu Selection Parameters - Merand AQUAPAN 100 Manual De Instrucciones

MENU SELECTION PARAMETERS

Pressing the icon SELECTION PARAMETERS of the principal menu we will access to the following
screen:
On the screen there will appear some squares with the names of the different parts of the machine.
Pressing on the values we can change the function parameters of the different parts. The parameters
that you can change are the following:
ENTRY TABLE: Indicates the speed of the entrance table to the lamination. Expresses the lineal
speed in in HZ the function of the engine,
LAMINATION: Indicates the speed of the multi-roller above the lamination. The frequency is
expressed in HZ the function of the engine.
EXIT TABLE: Indicates the speed of the exit band of the guillotine. Expresses the lineal speed in HZ
the function of the engine.
CUT LENTH: Indicates the distance in millimeters that will wind on on the transporting band between
each cut of the guillotine.
HEIGHT ROLLER: Indicates the value that the digital indicator of the multi-roller should mark and it
expresses the height of the lamination of the machine. This action hasn't got any effect on the
machine mechanisms, because you can adapt it manually.
SPADES SEPARATION: Indicates the value that marks the rules of the guides of the beginning. This
action hasn't got any effect on the machine mechanisms, because you can adapt it manually.
Page 40