Specifications; Setting Up The Sewing Machine - JUKI MS-1261/V045 Manual De Instrucciones

SPECIFICATIONS

Model
Application
Number of needle
Sewing speed
Needle
Feed system
Height of presser foot
Stitch length
Needle gauge
Circumference of cylinder
Lubricating oil
- Equivalent continuous emis-
sion sound pressure level
(L ) at the workstation:
pA
A-weighted value of 81.5
dB; (Includes K
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 3,600
Noise
sti/min.
- Sound power level (L
A-weighted value of 90.5 dB;
(Includes K
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 3,600
sti/min.
Model
Application Cloth puller for light- to extra-heavy-weight materials
Cloth puller type Upper roller feed

1. SETTING UP THE SEWING MACHINE

!3
!2
1
5
4
6
7
!5
8
9
2
!4
MS-1261/V045 MS-1261/V046
For heavy- to extra-heavy-weight materials
ORGAN UY x 128GAS-NY #16 to #22
(standard #21)
SCHMETZ UY128GAS Nm. 100 to Nm. 140
(standard Nm. 130)
Intermittent feed by means of a one-touch utility clutch Link rate adjustable
- Equivalent continuous emis-
sion sound pressure level
(L ) at the workstation:
pA
A-weighted value of 78.5
= 2.5 dB); dB; (Includes K
pA
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 3,600
sti/min.
);
WA
= 2.5 dB);
WA
V045
Upper/lower roller feed
3
4
!1
MS-1261M/V045
3
Max. 3,600 sti/min (normal 3,000 sti/min)
SCHMETZ UY128GAS Nm. 100 to Nm. 140
10 mm
1.4 to 4.2 mm (with a cloth puller)
7/32", 1/4", 9/32", 5/16", 3/8"
194 mm
JUKI New Defrix Oil No.1
- Equivalent continuous emis-
sion sound pressure level
(L ) at the workstation:
pA
A-weighted value of 81.5
= 2.5 dB); dB; (Includes K
pA
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 3,600
sti/min.
- Sound power level (L
A-weighted value of 90.5 dB;
(Includes K
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 3,600
sti/min.
V046
1) When carrying the sewing machine, be sure to carry by
two people.
(Caution) Do not hold the pulley.
2) Do not place a protruding object, such as a screw driver,
at a place where the sewing machine is to be installed.
3) Attach belt dodging base 1 to the sewing machine with
!0
hexagon head bolt 2 .
4) Put the sewing machine on the table and determine its
position (belt groove and through hole 3 for passing
the presser bar lifter chain).
5) Attach two machine head support plates 4 to the
sewing machine by means of screw 5 . Fix the plates
on the table by means of hexagonal bolt 6 , washer 7 ,
spring washer 8 and nut 9 .
6) Place a level on bed side plate !0 in a lateral direction
and a longitudinal direction to check that the sewing
machine is properly placed in a horizontal position.
7) Install belt cover !1 , V belt, belt cover lid !2 , and top
cover ! 3 on the sewing machine and fix them with
screws !4 and !5 .
When installing the belt over, temporarily tighten the
screw fi rst. Then, securely tighten the screw after the
installation of all related parts.
– 1 –
MS-1261M/V046
For medium- to heavy-weight materials
ORGAN UY x 128GAS-NY #16 to #22
(standard #19)
(standard Nm. 120)
- Equivalent continuous emis-
sion sound pressure level
(L ) at the workstation:
pA
A-weighted value of 78.5
= 2.5 dB); dB; (Includes K
pA
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 3,600
sti/min.
);
WA
= 2.5 dB);
WA
= 2.5 dB);
pA