Cruise Control Button; Mt 6127 Zl); Reverse Mowing Safety Switch - Viking MT 5097 Manual De Instrucciones

If necessary, the electronics can be
programmed so that the mowing
deck is automatically disengaged
when the grass catcher box is full.
( 13.8)
8.7 Cruise control button (MT 6112 ZL,

MT 6127 ZL)

The cruise control button sets the
current driving speed when driving.
Although the "cruise control active"
symbol appears on the display
when reversing after the cruise
control button is pressed, cruise
control remains deactivated for
safety reasons.
The cruise control button has no
function on the model MT 6112 C.
Activating cruise control:
Select the required driving speed and
press the cruise control button (1) for at
least 1 second. Cruise control is activated
as soon as the "cruise control active"
symbol (2) appears on the display. The
22
drive pedal is locked in place and the
current driving speed is maintained. The
foot can be removed from the drive pedal.
Deactivating cruise control:
Risk of injury!
Place the foot on the drive pedal
prior to deactivating the cruise
control in order to prevent the drive
pedal from springing back, thereby
preventing abrupt braking of the
ride-on mower.
● Press the cruise control button, leave
the driver's seat or actuate the brake
pedal.
Cruise control is deactivated as soon as
the "cruise control active" symbol
disappears from the display.

8.8 Reverse mowing safety switch

The reverse mowing safety switch
enables the mowing deck for
mowing in reverse driving
direction. The mowing deck is
automatically disengaged for safety
reasons if reverse mowing is not enabled.
For reverse mowing, briefly press the
reverse mowing safety switch (1) once
with the left foot within a defined time
window.
1 Enable with the mowing deck
disengaged:
● Bring the ride-on mower to a standstill
and select reverse driving direction.
( 8.9)
● Briefly press the reverse mowing safety
switch once with the left foot.
● Engage the mowing deck and start
reverse mowing within 5 seconds.
( 8.5), ( 8.6)
Reverse mowing can also be enabled
up to 1 second after starting.
2 Enable with the mowing deck
engaged:
● Briefly press the reverse mowing safety
switch once with the left foot during
mowing operation.
● Switch to reverse driving direction
within 5 seconds and continue mowing.
( 8.9)
Reverse mowing can also be enabled
up to 1 second after changing the
driving direction.
If the reverse mowing safety switch
is continuously pressed, the switch
must be released within the time
window and pressed again.
The "reverse mowing" symbol
flashes on the display on the
models MT 6112 C, MT 6112 ZL
and MT 6127 ZL until reverse
mowing is enabled. (
0478 192 9807 C - EN
10.5)