Inglesina Kit Auto Maxi Manual De Instrucciones página 20

crotch strap (F) into the hole at the bottom of the carrycot,
always passing through the internal mattress (G).
TM
Welcome Pad : if present, carry out the crotch strap
fastening sequence, passing through the dedicated slot on
TM
the Welcome Pad first.
fig. 8 Place the loops of the crotch strap (F) into their
housings on the external base of the carrycot.
fig. 9 Ensure that the 3-point harness (B) is correctly
fastened by pulling it firmly upwards from inside the
carrycot.
fig. 10 PERMITTED INSTALLATION CONFIGURATIONS
A | B The carrycot is positioned in the middle of the rear
seats and fastened through the belts of the outermost seats.
A
B
C | D The carrycot is positioned on a side seat and the
central one and fastened through the belts of these two seats.
The child's head is on the central seat. In this configuration,
one of the seats remains free for another passenger.
C
20
D
fig. 11 NON-PERMITTED
CONFIGURATIONS
E | F The carrycot cannot be fastened if the belt of
the central seat is positioned internally with respect to the
carrycot.
E
F
G | H For greater safety in the event of side impact, when
the carrycot is positioned on a side seat and the central seat,
the child's head must not be on the side seat next to the door.
G
INSTALLATION