Setting The Time; Setting The Date - MIYOTA OS10 Manual De Instrucciones

SETTING THE TIME

1. Pull the crown out to the second position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to run.

SETTING THE DATE

1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date. Important: If the date is set between the
hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
SETTING THE DAY ( OS00 )
1. Pull the crown out to the 1st click position.
2. Turn the crown clockwise to set the day.
* If the day is set between the hours of around 11:15 PM and 6:00 AM, the day may not change
on the following day.
3. After the day has been set, push the crown back to the normal position.
65