Samsung NX58H9950W Serie Manual Del Usuario página 44

Maintenance
Racks
To keep the racks clean, remove them from the cavity, and soak them in lukewarm
soapy water. Then, scour impurities off of the racks using a plastic scouring pad.
If the racks do not slide in and out smoothly after you have cleaned them, rub the
side rail guides with wax paper or a cloth containing a few drops of cooking oil.
This will help the racks glide more easily on their tracks.
Gliding rack (NX58H9950W* Only)
44 English
1. Remove the gliding rack from the oven.
2. Fully extend the gliding rack on a table.
It is a good idea to put newspaper
beneath the rack for later cleanup.
3. If the sliding tracks are contaminated,
remove impurities using a paper towel.
Reapply the graphite lubricant according
to the instructions below:
To apply the graphite lubricant
NOTE
• Do not use a dishwasher to clean the racks.
• If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
• If a rack becomes too difficult to slide in or out, lubricate the rack.
• To order Graphite Lubrication, call our customer center at 1-800-SAMSUNG
(726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
1. Shake the graphite lubricant before
opening it.
2. Apply 4 drops of lubricant to the inner
side of the left sliding track, and 4 drops
to the outer side of the left sliding track.
3. Repeat step 2 above on the right sliding
track.
4. Extend and collapse the gliding rack
several times to distribute the lubricant.