Replacement - Samsung NX58H9950W Serie Manual Del Usuario

Maintenance
To delay starting the self-cleaning cycle
2
1. Repeat steps 1 and 2 on the previous page.
2. Press the Delay Start button. The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press the START/SET button. The oven will start self-cleaning at your specified
time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke
in the oven. To turn off the self-cleaning cycle, press the OFF/CLEAR button. The
cycle turns off, but the door remains locked and the Lock icon blinks until the oven
temperature falls below 392 °F (200 °C).
After self-cleaning
• The door stays locked until the internal oven temperature falls below 392 °F.
• When the oven has cooled down, wipe the oven surfaces with a cloth to
remove ash residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be
removed using a vinegar-soaking cloth.
• If you are not satisfied with the cleaning results, repeat the cycle. "HOT"
appears on the display until the oven cools down. Wait until the message
disappears, and start a new cycle.
• Self-cleaning does not operate within 2 hours after running the self-cleaning
cycle.
48 English
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or
steam could burn you.

Replacement

3
4
Oven light
The oven light is a standard 40-watt appliance bulb. It comes on when you open
the oven door.
CAUTION
To prevent electric shock, make sure the gas oven is turned off and cool before
replacing the oven light.
NOTE
• The oven light does not operate during the self-cleaning cycle.
• Remove the racks if they are in the way to the oven light.
1. Turn off the oven.
2. Make sure the oven and oven light are
cool.
3. Open the door, and remove the glass
cover by turning it counterclockwise.
4. Remove the oven light from the socket
by turning it counterclockwise.
5. Insert a new 40-watt appliance bulb into
the socket, and then turn it clockwise to
tighten.
6. Reinsert the glass cover, and then turn it
clockwise to tighten.