Troubleshooting; Checkpoints; Surface Burner - Samsung NX58H9950W Serie Manual Del Usuario

Maintenance
50 English
4. Put the drawer in the roller guides on
either side, and then snap the clips into
place.

Troubleshooting

If you encounter a problem with the gas oven, first check the table below and try
the suggestions.

Checkpoints

Gas safety
Problem Possible cause
You smell gas. There is a gas leak.
The surface burner knob is
not in the OFF position and
the burner is not lit.

Surface burner

Problem Possible cause
All burners do The power cord is not
not light. plugged into the electrical
outlet.
A fuse in your home may be
blown or the circuit breaker
tripped.
The gas supply is not properly
connected or turned on.
Action
Clear the room, building, or
area of all occupants.
Immediately call your gas
supplier from a neighbor's
phone. Do not call from your
phone. It is electrical and
could cause a spark that could
ignite the gas. Follow the gas
supplier's instructions.
If you cannot reach your
gas supplier, call the fire
department.
Action
Make sure the electrical
plug is plugged into a live,
properly grounded outlet.
Replace the fuse or reset the
circuit breaker.
See the Installation
Instructions that came with
your range.