Making The Electrical Connection - Home Decorators Collection 1001 694 277 Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
5
Wiring the receiver to the household
wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires
are on one side of the outlet box and the black wire is on the
other side.
□
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (BB).
□
Connect the receiver red wire to the household black (hot)
wire using a wire connecting nut (BB).
□
Connect the receiver (J) white wire to the household white
wire (neutral) wire using a wire connecting nut (BB).
□
Secure each wire connecting nut (BB) using electrical tape.
BB (x3)
Receiver
Antenna
(Leave connected and do not cut)
WINK
Antenna
Receiver(J)
Green (or Bare)
Black
White
Green
White
Red
ON DIP
1 2 3 4
6

Making the electrical connection

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with an
extended ball/ downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.)
□
The fan comes with 54 in. lead wires for use with an extended
ball/ downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.). This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the fan motor white wire to the receiver white wire
using a wire connecting nut (BB).
□
Connect the fan motor black wire to the receiver black wire
using a wire connecting nut (BB).
□
Connect the fan motor blue wire to the receiver blue wire
using a wire connecting nut (BB).
□
Secure each wire connecting nut (BB) using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (JJ).
Outlet Box
in the ceiling
(JJ)
Receiver
Antenna
WINK
Antenna
10
Outlet box in the ceiling
Green
Receiver (J)
ON DIP
1 2 3 4
Blue Black White
BB (x3)
(JJ)