Printer" Menu; Serial Link" Menu; Results" Menu; Measurements" Menu - Georges Renault DELTA4000 Manual Operario

6159938010-07
English
12 / 200
Torque-limiting screwdriver
Other types of transducers
The various types of digital transducers are the following:
Rotary torque and angle transducers*
Rotary torque transducers
Only the CMD5xxx, DRT5xx type and specific torque and angle transducers are available when the T+A or A+T
measurement type is selected (for the DELTA5000/5D).
If a new type of digital transducer is detected, it is stored with its characteristics in the list of transducers (up to a
maximum of 20 new transducers, as compared with the present set list).
"curve" submenu:
Threshold
Time

4.2 - "Printer" Menu

Type EPSON by default/EPSON LQ/IBM/IBM Pro/HPDeskJet/HPLaserJet
Length 6 - 80
Upper margin 0 - 74
Width 1 - 80
Left margin 0 - 79

4.3 - "Serial link" Menu

Type RS232
Baud rate 2400/4800/9600/19200/38400/57600/115200
Data 7/8
Stop 1/2
Parity none/even/odd

5 - "RESULTS" MENU

To exit the "Acquisition" menu, press
The unit can be reset (erasing all parameters and measurements) by pressing

5.1 - "Measurements" Menu

The memory capacity of the unit is 5 000 results as a maximum. Each result includes the torque value, angle value (for
the DELTA5000/5D), unit, date and time of the measurement, as well as the report.
The screen displays the result of the last measurement.
¨ ©
Press or to display the results of the other measurements. To display the result of a specific measurement, press
{
, enter the measurement number and press
On the last line (bottom arrow), you can erase the measurement(s) (Reset measurement or Reset all) or all the
measurements of the unit (Reset unit): to select your option, use
Torque threshold for saving the curve.
When the value is at 0 (by default), the last x seconds before the end of the measurement are
saved (the measurement drops below the measurement threshold which can be modified in the
"Parameters/Task" menu). When the value is different from 0, the x seconds after crossing the
torque threshold are saved.
0.5 - 1 - 5 - 10 - 20 s.
¡
.The main menu is displayed.
{
DELTA4000/5000/4D/5D
TD2001
Specific from 1 to 20 (7 alphanumerical characters are availa-
ble to enter the name of the transducer)
DRT5H2/DRT5H5/DRT5Sq20/ DRT5Sq25/ DRT5Sq75/
DRT5Sq180/ DRT5Sq500/ DRT5Sq1400 (*for the
DELTA5000/5D)
DRT4H2/DRT4H5/DRT4Sq20/DRT4Sq25/DRT4Sq75/
DRT4Sq180/ DRT4Sq500/ DRT4Sq1400
¥
when switching on.
again.
¨ ©
or .