Connecting And Removing The Wilo-Connector - Wilo Stratos MAXO Instrucciones De Instalación Y Funcionamiento

6.3 Connecting and removing the
Wilo-Connector
Installation and operating instructions Wilo-Stratos MAXO/-D/-Z
Electrical connection
WARNING
Risk of fatal electrical shock!
▪ Never connect or remove the Wilo-Connector under mains voltage!
CAUTION
Material damage due to improper fixation of the Wilo-Connector!
Improper fixation of the Wilo-Connector may cause contact problems and electrical
damage!
▪ Exclusively operate the pump when the metal clamp of the Wilo-Connector is locked!
▪ Disconnection of the Wilo-Connector under voltage is not permitted!
Connecting
Fig. 24: Preparing the connection
1. Prepare the cable as indicated in the Figure.
Fig. 25: Open Wilo-Connector
2. Unscrew the cable bushing of the supplied Wilo-Connector.
3. Remove the upper part of the Wilo-Connector.
en
139