Settings Menu - Set Auto Control - Wilo Stratos MAXO Instrucciones De Instalación Y Funcionamiento

Pre-defined applications in the settings assistant
Temperature T-const
Temperature ΔT-const
Speed n-const
PID control
Table 23: Pre-defined applications in the settings assistant
8.5

Settings menu - Set auto control

Installation and operating instructions Wilo-Stratos MAXO/-D/-Z
Setting the control functions
The "Set auto control" menu described below only provides the menu items for selec-
tion that can also be used in the currently selected control function.
For this reason, the list of potential menu items may be much longer than the number
of displayed menu items at any one time.
Set auto control
Settings assistant
Current: Radiator – Dynamic Adapt plus
Setback operation
Detection: Switched off
Emergency operation speed
Constant speed: 2000 rpm
Pump ON/OFF
The pump is: Motor Off
Fig. 59: Set auto control
Settings menu
Settings assistant
Heating/cooling switchover
Only visible if "Heating & Cooling" has
been selected in the settings assistant.
Available additional control functions
‣ Q-Limit
Max
‣ Q-Limit
Min
‣ Setback operation
‣ No-Flow Stop
‣ Q-Limit
Max
‣ Q-Limit
Min
‣ Setback operation
‣ No-Flow Stop
‣ Q-Limit
Max
‣ Q-Limit
Min
‣ Setback operation
‣ No-Flow Stop
‣ Q-Limit
Max
‣ Q-Limit
Min
‣ Setback operation
‣ No-Flow Stop
‣ Q-Limit
Max
‣ Q-Limit
Min
Select a control mode via
the application and
system type.
All control modes
are also available to be selected
directly.
Description
Setting the control mode via application
and system type.
Adjust the automatic or manual
switchover between heating and cooling.
When selecting "Heating/cooling
switchover" in the settings assistant you
must enter when the pump operates in
the corresponding mode.
In addition to a manual selection of
"Heating or cooling", options "Automatic"
or "Switchover through a binary input" are
also available.
Automatic: Fluid temperatures are re-
quested as decision-making criteria for
the switchover after heating or cooling.
Binary input: An external binary signal for
en
173