Controls - Winix NK300 Manual Del Usuario

CONTROLS

Air Outlet Vent
Mode Button
- Press to cycle through manual fan speeds (Low, Medium, High, Turbo).
- Pressing will also cycle through Auto and Sleep Modes.
- When sleep mode is selected the Air Quality Indicator light will be turned off.
- Press and hold for at least 3 seconds to enable or disable PlasmaWave
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Light Sensor
Detects the
amount of
ambient light
within the
environment,
Power Button
to adjust the
Turns the unit
brightness
on or off.
of the LED
indicators.
English
Change Filter Indicator
LED light indicates when it is time to
change the filter.
Air Quality Indicator
Color-coded LED indicates
one of three levels of air
quality.
®
PlasmaWave Indicator
Indicates whether
®
PlasmaWave is enabled or
disabled.
Child Lock Button
Press and hold for 3
seconds to enable
or disable the Child
Lock mode.
NK300
®
.
4