Jumbo Care control unit
A
B
The battery indicator B is located on the control box A. The LEDs
indicate the battery state (See following table).
Plug the power cord C into a power outlet.
1.
The battery will charge in approximately 4 hours.
2.
Disconnect the power cord from the power outlet after the
battery has been fully charged.
Battery
Battery
Description
Indicator
State
Full
The battery is OK — no need for
Charge
charging (100–50%). The third LED is
GREEN.
Partial
The battery needs to be charged
Charge
(50–25%). The second LED is
YELLOW.
1575480-A
Battery
Battery
Description
Indicator
State
Low
The battery needs to be charged (Less
Charge
than 25%). The horn beeps when a
button is pressed. The first LED is
YELLOW.
Low
The battery needs to be charged.
Charge
Some of the functionality of the lift is
(LED
lost and it is only possible to lower the
blinking)
boom.
An audible alarm will sound (horn
will beep) when battery is low. If the
audible alarm sounds during a transfer,
complete that transfer and then charge
the battery.
Usage
21