Routine Maintenance - BM2 BIEMMEDUE DUSTY 650 M Manual De Uso Y Mantenimiento

Description
Below is a list of the contents of the package delivered to the
customer. If one of the parts listed below is missing, contact the
dealer immediately.
1 x sweeper;
•
1 x side brush;
•
3 x hex socket screws for fixing the side brush;
•
1 x sweeper use and maintenance manual;
•
Operator instructions
Training
All operators must be suitably trained, including with hands-on
experience. This training should emphasise:
That the machine may not be used on public roads;
•
The need for attention and concentration while working;
•
Do not use the sweeper on slopes of greater than 12%.
•
Never use the sweeper with defective guards or without
•
the safety devices.
Controls
The operator controls the sweeper by means of the handlebar.
Moving the sweeper causes rotation of the wheels which transmit
the motion by means of a gear, belts and pulleys to turn the centre
and side brushes.
Operations at the end of the session
After sweeping, empty the front and back bins;
•
For the rear bin, lower the lever locking the clip fixing the
•
bin to the sweeper;
Release the clip and remove the bin;
•
For the front bin, turn the fixing knob and remove it by the
•
handle.
Fixing screw

Routine maintenance

Safety rules for routine maintenance
Routine maintenance involves a series of simple operations to be
performed at regular intervals and according to the manufacturer's
instructions. The Manufacturer has reduced the number and
complexity of routine maintenance operations to enable them to be
performed by personnel without technical expertise or complex
equipment. It involves above all:
Safety regulations for cleaning the sweeper
All cleaning operations must be performed with the sweeper
stationary.
When cleaning the sweeper or its components, the following
precautions must be observed:
Do not clean plastic surfaces with alcohol, detergent or
solvents. Dispose of cleaning materials in respect of current
legislation. Do not dispose of the materials used or cleaning
residues in the environment. To clean, use water or
compressed air and soft cloths.
IMPORTANT - During cleaning, personnel protection devices
must be worn
Safety regulations for repairs and extraordinary
maintenance
The Manufacturer recommends contacting authorised service
centres for all operations over and above normal routine
Lock lever
maintenance.
Rear bin
It should be noted that the warranty offered by the manufacturer is
invalidated if:
Adjusting and replacing belts;
•
Replacing parts subject to wear;
•
Cleaning external surfaces and internal parts.
•
The dust contained in the debris collection bin or
captured by the air filter may be harmful to persons
affected by chronic respiratory diseases. They should
wear suitable P.P.D.
IMPORTANT –- Do not use solvents to clean the
sweeper as there is a risk of fire due to electrostatic
discharges caused by rotation of the brushes.
All operations must be performed by qualified
personnel with the necessary technical skills to
perform the operations in the maximum safety and in
respect of current legislation.
The instructions given in the "use and maintenance"
•
manual are not scrupulously respected;
Repairs or maintenance are performed by unqualified
•
personnel;
Non-original spare parts are used;
•
Unsuitable tools are used.
•
IMPORTANT - The customer is responsible for
verifying that original parts only are used when
carrying out repairs. The use of non-original spare
parts could jeopardise the safety of the sweeper.
Fixing knob
Front bin