Safety Parameters; Transport And Installation - BM2 BIEMMEDUE DUSTY 650 M Manual De Uso Y Mantenimiento

Conditions of use
The SWEEPER has been designed to perform the functions
described in section of this manual only.
Weight and size
The weights and sizes of the sweeper are given in the following
tables.
Weight
Weight
Dimensions
Max. Le (Maximum length)
Max. Wdth. (Maximum width)
Max. H (Maximum height)
Work parameters
The work parameters provide the information necessary to choose
the most suitable sweeper for the specific needs.
Parameters
Maximum theoretical productivity
2
(m /h)
Cleaning width mm
Capacity of debris collection bin
(l)
Length of centre brush (mm)
Diameter of centre brush (mm)
Diameter of side brushes (mm)
Brush material

Safety parameters

Residual risks
In normal working conditions, there are no residual risks. There are,
however, residual risks always present during normal working
conditions exclusively in danger zones where access is prevented
by means of fixed guards. These guards must under no
circumstances be removed while the machine is in operation.
Guards on transmission components may be temporarily removed in
order to carry out adjustments or routine or extraordinary
maintenance (for extraordinary maintenance, always contact a
professional service centre). The residual risks arising under these
conditions may be eliminated by adopting certain procedures. When
using the sweeper, the operator must hold the handlebar in such a
way as to have an adequate view of the path of the sweeper in order
to avoid impact with obstacles (danger of tipping over) and people
(injury to persons). The dust contained in the debris collection bin or
captured by the air filter may be damaging to persons affected by
chronic respiratory diseases. These persons must use suitable
respiratory P.P.D..
Guards
All dangerous areas are closed with guards and protective devices
fixed to the chassis with screws making all hazardous areas
inaccessible to the operator.

Transport and installation

Lifting and handling
IMPORTANT - Follow the instructions below.
The sweeper is delivered from the Manufacturer on a pallet and
packed in a special cardboard box. Before unpacking, the machine
can be transported and handled by means of a lift truck with a
capacity of at least 200 kg.
28
870
960
410
To unpack the sweeper, remove the straps holding the cardboard
box to the pallet and remove the box. Once the sweeper has been
unpacked, it can be easily lifted by two people. A number of safety
1500
instructions relating to transport are given below.
650
30
390
For packaging reasons, the sweeper is delivered with the side brush
260
removed and the handlebar folded down. Before use, mount the
400
side brush and handlebar.
PPL
1.
2.
3.
Straps
Box
Pallet
1.1 Installation
IMPORTANT - Before proceeding with installation
read the following warnings carefully.
Straighten the handlebar;
•
Tighten the rotation block screw;
•
Tighten the fixing knob;
•
Tilt the side brush support and fix it by tightening the
•
screws.
Handlebar
Block screw
Fixing knob