Check The Tire Pressure; Check The Assembly Leveling; Check The Correct Position Of All Belts; Check The Brake System - TRAPP LT4217 Manual De Instrucciones

Screw to level
Image 8
Note:
The safety clamps cannot be reinstalled from top
to bottom.
8. Repeat these steps on the right side;
9. Position the belt (C) on the tractor drive pulley;
10. Adjust the safety rod that holds the belt on the tractor
drive pulley and secure it with a hexagonal bolt (A)
to the safety guard rod (B) as shown in Image 9;
11. The leveling screw allows you to adjust the side
heights to level the mower deck.
C
C
Image 9
122
D

Check the tire pressure

The tractor tires were factory-calibrated above
normal pressure for transport purposes. Correct tire
C pressure is important for best mowing performance.


Check the assembly leveling

The mower deck must be properly leveled for best
mowing results. See "Leveling the mower deck" in
the Repairs and Adjustments section of this manual.

Check the correct position of all belts

See the images that show the replacement of
the drive belts and blades in the Repairs and
Adjustments section of this manual. Check that the
belts follow the correct course.

Check the brake system

As soon as you begin to operate your tractor, check
that the brake is working properly. See "Checking
the brake" in the Repairs and Adjustments section
A
A
of this manual.

Checklist

Before operating your new tractor, we would like to
assure you have the best performance and the highest
possible satisfaction with this Quality Product.
B
B
Then follow the checklist below:



Warning!
Avoid injury. Never place your fingers between the
tensioning pulley while removing or repositioning
the belt.
Reduce the pressure to the PSI value displayed on

the tires themselves (rear 10 PSI and front 14 PSI).
There are no loose parts in the package.

The battery is properly primed and charged.

The seat is adjusted comfortably and securely.

www.trapp.com.br