Modifications To The Product; Accessories; In Case Of Damage; Connecting The Unit - Dentsply Sirona inLab MC X5 Manual Del Operador

Dentsply Sirona
Operating Instructions for suction devices
64 98 609 D3608
D3608.201.02.05.02 10.2020
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
2.1.4

Modifications to the product

Modifications to this product which may affect the safety of the operator,
patients or third parties are prohibited by law!
2.1.5

Accessories

In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories
expressly approved by Dentsply Sirona. In particular, only the power
cable also supplied or the corresponding original spare part may be
used with the unit. The user is responsible for any damage resulting
from the use of non-approved accessories.
2.1.6

In case of damage

In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your authorized dealer or the manufacturer.

Connecting the unit

2.2
The connection must be established in accordance with the directions
provided in these operating instructions. Also observe the information in
the Operating Instructions for inLab MC X5, CEREC MC / MC X, MC XL
Premium Package or CEREC Primemill devices.
If any devices not approved by Dentsply Sirona are connected, they
must comply with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.

Ventilation slots

2.3
Under no circumstances may the ventilation slots on the unit be
covered, since otherwise the air circulation will be obstructed. This can
cause the unit to overheat.
2 Safety information
2.2 Connecting the unit
9