Publicidad
4. ESQUEMAS DE CONEXIÓN.
4.1 INTRODUCCIÓN Y CONFIGURACIÓN TELECÁMARA.
INTRODUCTION AND CAMERA CONFIGURATION.
CONNECTION SCHEMATICS.
IMPORTANT:
a) The connecting of the two wires has not polarity.
b) In no case should join bus cables directly. To extend
the bus, you should use the BUS OUT terminal.
c) If the multipair cable is used in the installation, you
can only use one pair, and never more than a
couple unite to bend section.
d) If the cable used has several wires, you can only
use two wires, and never must unite several cables
to bend section.
In installations with secondary accesses, the cable
(2 wires) parts from the main street panel and runs
through the street panel of the secondary accesses
in series fashion, then running up to the dwellings
from the latter of these accesses
.
Publicidad
