Instructions For Putting Into Operation; Safety Instructions - STAYER WELDING OVERCONTROL 400 Manual De Instrucciones

This manual is in conformity with the date of manufacture
of your machine; you may find this information in the
technical datasheet of the acquired machine, and look for
updates on our website: www.grupostayer.com
The OVERCONTOL product protects the equipment
against electric hazard of 230 V A/C it is connected to:
• OVERCONTROL disconnects the equipment to be
protected when a hazard arises.
• When the hazard has disappeared, OVERCONTROL
connects the equipment to the electrical grid or generator.
• The level of protection against long lasting hazard (more
than 0.02 sec) is selectable by the user as a function of
safety and inconvenience derived from the number of
power cuts and restarting the equipment protected.
• The level of protection against high-voltage and/or short
cuts (less than 0.02 sec) is fixed and immediate.
• The device protects equipment connected thereto; it does
not stabilize a generator output and does not stabilize a
disrupted electrical grid.
1. index
2. Specific safety instructions ............................. 8

3. Instructions for putting into operation ........... 8

3.1 Positioning ........................................................... 8
3.2 Assembling........................................................... 8
3.3 Power connection ................................................ 8
3.4 Illustrated description of functions ....................... 8
3.5 Limitations to environmental conditions ............... 8
4. Operating instructions ..................................... 8
4.1 Positioning and testing .......................................... 8
4.2 Setting operations ................................................. 9
5. General instructions for use............................ 9
6. Servicing and maintenance instructions ....... 9
6.1 Regulatory Marking ............................................. 10
6.2 Repair service ..................................................... 10
6.3 Garantía .............................................................. 10
6.4 Guarantee ........................................................... 10
6.5 Declaration of Conformity ................................... 10

2. Safety instructions

READ THE INSTRUCTIONS
Using this equipment in a sufficiently wrong way definitely
involves hazard of death or serious injuries.
Always connect the equipment to an electrical installation
which is in a perfect condition and which is in accordance
with any directives, regulations and rules as in force.
This equipment compulsorily requires perfect electrical
grounding. In addition to serious hazard, the equipment
will suffer from serious loss of performance.
english
8
If you give a professional use to this equipment, refuse
to use it if the equipment and its system (rest of the work
installation) are not included in the plan for preventions of
occupational risks your company must have mandatorily
and you must be trained for perfectly. Otherwise, alert
Labor Inspection and refrain from using it.
3. Instructions for putting into operation
3.1. Positioning
Position equipment on a flat, dry and fresh surface. Keep
equipment separated at least 10 cm from any wall. Avoid
use under rain or precipitation of liquids.
3.2. Assembling
The equipment is delivered in a completely assembled,
calibrated condition ready for use.
3.3. Power connection
Connect equipment to an installation which is in a perfect
página
condition and in accordance with the equipment's technical
features.
Ask a legally authorized electrician to make sure that
the installation is in a perfect condition that includes
conductors having a sufficient section (at least 4 mm),
electrical grounding, a 20 mA earth leakage circuit breaker
and a 40 ampere magneto-thermal cutout switch.
3.4. Illustrated description of functions
1. Regulator for low voltage protection.
2. Regulator for high voltage protection.
3. 3 x7 LED power input tension and alarm display.
4. OVERCONTROL power input plug.
5. Power output for the equipment to be protected.
3.5 Limitations to environmental conditions
The equipment has a nominal IP of 20 which must be
respected. Use within dry indoor areas is recommended.
When used outdoors, it will always used in dry environments
without puddles and without rain. Do not use equipment in
excessively dusty environments
4. Operating instructions
4.1. Positioning and testing
Check physical integrity of the equipment. Connect the
equipment's Schuko EEC 7/7 input plug (4) to the grid's
or generator's power output. Connect the plug of the
equipment to be protected to the OVERCONTROL's
Schuko output. Move the two regulators (1-2) to position
"MAX". The equipment's display (3) will turn on showing
the voltage present at the equipments input.
8