Remove The Shuttle And Its Accessories - Premier MCO-5424 Manual De Instrucciones

Chapter VI – Maintainance of Machine
Pendelspule und die Zubehöre entnehmen
Instruction: Switch off lamp or pull plug out. Take out the pendular shuttle: Raise needle to its hightest
position and lift shuttle cover. Remove the bobbin case from the machine.
Uncover shuttle lever and draw out the shuttle retaining ring.
Instruction: Clean the feed dog with a brush and soft and dry rag.
(1) Bobbin case
(2) Shuttle lever
(3) Shuttle retaining ring
(4) Pendular shuttle
(5) Shuttle carrier
Installation of the pendular shuttle: hold shuttle center pin and fit carefully back into the shuttle carrier.
Refit shuttle retaining ring and make sure that the following center pin is fixed in the slot of the shuttle
canier. Lock retaining ring by truning levers back into position. Refit bobbin case with bobbin.
(6) Center pin
(7) Slot
P-40