Publicidad
Idiomas disponibles
Idiomas disponibles
-P5: Cleaning time setting from 1 minute to
en
5 minutes.
it
NOTE: When the control panel shows a
de
red LED and emits an acoustic beep, it
means that the tank is empty and must
es
be filled again ("COOL" function). To de-
fr
activate the acoustic beep, deactivate
the "COOL" function.
nl
pt
During operation, a status LED lights up on
the control panel:
da
-GREEN LED (on): Cooler in operation.
-ORANGE LED (on): Cooler switching on
fi
with low water level.
no
-GREEN LED (flashing): Communication
problems between the control panel and
sv
cooler.
pl
-RED LED (on): Cooler switching off or in
stand-by with low water level.
ru
cs
►►4.3. SWITCH-OFF
hu
IMPORTANT: TO DISCHARGE THE WATER
FROM THE TANK, ENABLE THE "COOL"
sl
FUNCTION BEFORE SWITCH-OFF.
►Press ON/OFF / POWER to turn off the
tr
cooler (Pic. 9).
hr
lt
lv
►►►5. CLEANING AND MAINTE-
et
NANCE
WARNING: BEFORE CARRYING OUT
ro
ANY
MAINTENANCE
sk
DISCONNECT THE APPLIANCE FROM
THE
MAINS
bg
SUPPLY.
uk
Depending on the environment where the
cooler is used, dust, dirt, etc. can affect the
bs
performance of the cooler. We therefore
recommend cleaning (never clean with a high
el
pressure water jet) the outside of the cooler
zh
with a soft cloth, removing any obstructions
from the air vents.
IMPORTANT:
-The cooler tank must be emptied and sani-
tised periodically depending on the use.
-The cooling pad surfaces must be periodi-
cally inspected and sanitised depending on
the use.
OR
REPAIRS,
POWER
AND
WATER
-For sanitation operations, biocidal prod-
ucts that comply with European regulation
no. 582/2012 must be used.
Publicidad
