Installing The Chain Counter - MZ electronic NAUTI 030 Instrucciones De Uso

Installing the chain counter

(see Fig. 3 and connection diagram)
Warning
ALWAYS DISCONNECT THE BATTERY PRIOR TO
INSTALLATION.
• The chain counter must be positioned so that the display will be easy to
read. It should not be exposed to direct sunlight.
• The rear part of the instrument must be protected from contact with water or
moisture.
• Drill a rectangular hole of 91 x 44 mm (3" 5/8 x 1" 3/4) on the dashboard.
• The dashboard thickness may not exceed 20 mm (13/16").
• In the part to the rear of the dashboard there must be minimum clearance of
100 mm (3" 15/16).
NAUTI 030 18
English
Rev. 05 – 2007