Pump Assembly - NUK Expressive 62772 Instrucciones De Operación

Before using the pump, disassemble and clean according to the instructions in
sections 5 and 6.
ASSEMBL Y INSTRUCTIONS:
NOTE: Make sure all pieces are rmly in place to ensure good seals to create
a vacuum needed to express breast milk.
BREAST SHIELD ASSEMBL Y
1
Screw the connection ring (5) clockwise
onto the base of the breast shield (2).
3
Push the back ow
valve (6) into
the connection
ring (5) on the
breast shield (2).
5
Screw the Breast Milk Container (8)
onto the connection ring (5) on the
assembled breast shield.
03_62772_5112_A_DEBP_Booklet_REL_2-19-13_Added pages divisible by 4.indd 9

7. Pump Assembly

2
Push the membrane
(7) into the hole of the
back ow valve (6).
4
Place the silicone gasket (3) onto the
breast shield connector (4) and screw the
breast shield connector clockwise into the
back of the breast shield (2).
6
Push the silicone cushion (1), onto the
opening of the breast shield (2).
7
Repeat steps 1-6 for the other side.
9
Silicone-gasket (3)
3/18/2013 2:26:55 PM