Britax ONE4LIFE CLICKTIGHT Guia Del Usuario página 46

2. Pull the cover away from
the belt path area.
3. Pull the cover up and over
the cup holders.
Removing the Anti-Rebound Cover
(For models with anti-rebound bar)
1. Open the CLICKTIGHT.
2. Unhook elastic bands
from the front of the seat.
3. Remove the anti-rebound
bar. Push the inner red
button. Pull the anti-
rebound bar away on one
side. Repeat on the other
side.
4. Unhook the two small
elastic loops from the
plastic tabs.
5. Pull the cover away.
Installing the Cover
Installing the Side Protection Bottom Cover
1. Tuck the cover in by the
REAR-facing belt path.
2. Pull over the cup holders
so that the cover tucks
under the cup holders.
3. Pull the cover around
the front of the shell.
44
PUSH