Eu Declaration Of Conformity; Technical Data; Manufacturer's Warranty (European Union) - GO2 RH3 Instrucciones De Uso

EU Declaration of Conformity

Product
Function: Manoeuvring assistant
Model: GO2
Version: RH3
Manufacturer
Truma Gerätetechnik GmbH & Co. KG
Wernher-von-Braun-Str. 12,
85640 Putzbrunn, Germany
The manufacturer is solely responsible for issuing this
declaration of conformity.
The product complies with the relevant harmonisation
legislation of the Union:
Directive 2014/53/EU Radio Equipment
The following (harmonised) standards and other
technical specifications were taken as the basis:
ETSI EN 300 220-1 V3.1.1; ETSI EN 300 220-2 V3.1.1
Draft ETSI EN 301 489-1 V2.2.0; draft EN 301 489-3 V2.1.1
EN 62479:2010
EN 62368-1:2014+A11:2017
VCA, Bristol BS5 6XX, United Kingdom has issued the
following type approval(s): E11 10R-05 10956
Signed for and on behalf of:
Truma Gerätetechnik GmbH & Co. KG
Alexander Wottrich
Managing Director

Technical data

Description
Area of use
Single-axle caravans with a gross
Max. climbing
ability
Operating
voltage
Maximum pow-
er consumption
Average power
consumption
Quiescent
current
(Standby)
Maximum speed
Weight
Remote control
frequency
Subject to technical changes.
Putzbrunn, 11.01.2021
GO2 RH3
weight of up to 1800 kg
13 %
12 V
100 A
28 A
60 mA
(30 mA)
9 m / min
33 kg
Class 1, 868 MHz
Manufacturer's Warranty
(European Union)
1. Scope of Manufacturer's Warranty
As the Manufacturer of the appliance, Truma undertakes a
warranty towards the Consumer that covers any material and/
or manufacturing defects of the appliance.
This Warranty is applicable in EU member states as well as
in Iceland, Norway, Switzerland and Turkey. A Consumer is
the natural person who was the first one to purchase the
appliance from the Manufacturer, OEM or dealer and who
neither resold the appliance in a commercial or self-employed
professional capacity nor installed it for a third party in such a
capacity.
The Manufacturer's Warranty covers any of the aforemen-
tioned defects that occur within 24 months upon concluding
the purchase agreement between the seller and the Con-
sumer. The Manufacturer or an authorised service partner
undertakes to remedy such defects through subsequent
fulfilment, i.e. at its discretion either by repairing or replacing
the defective item. Defective parts shall become the property
of the Manufacturer or the authorised service partner. If the
appliance is no longer manufactured at the time of defect no-
tification and if replacement delivery has been opted for, then
the Manufacturer may deliver a similar product.
If the Manufacturer remedies a defect under its Warranty
commitment, the term of the Warranty shall not start again
with regard to the repaired or replaced parts; rather, the
original warranty period shall continue to be applicable to
the appliance. Only the Manufacturer itself or an authorised
service partner shall be entitled to conduct a warranty job.
Any costs that occur in the event of a warranty claim shall be
settled directly between the authorised service partner and
the Manufacturer. The Warranty does not cover additional
costs arising from complicated removal or installation
jobs on the appliance (e.g. dismantling of furnishings or
parts of the vehicle body), and neither does it cover travel
expenses incurred by the authorised service partner or the
Manufacturer.
No further-reaching claims shall be permitted, especially
damage claims presented by the Consumer or third parties.
This shall not affect the provisions of the German Product
Liability Act (Produkthaftungsgesetz).
The voluntary manufacturer's warranty does not affect the
Consumer's legally valid claims for defects against the seller
in the relevant country of purchase. In individual countries
there may be warranties that can be issued by the relevant
dealer (official distributor, Truma Partner). In such cases the
warranty can be implemented directly through the dealer from
whom the Consumer bought the appliance. The warranty
regulations of the country in which the appliance was
purchased by the Consumer for the first time shall also be
applicable.
2. Warranty exclusions
No warranty claim shall be applicable under the following
circumstances:
– Improper, unsuitable, faulty or negligent use and any use
that is not compliant with the intended purpose
– Improper installation, assembly or commissioning, contrary
to operating or installation instructions
– Improper operation or operation contrary to operating
or installation instructions, particularly any disregard for
maintenance, care or warning notes,
– Instances where installations, repairs or any other
procedures have been conducted by non-authorised parties
– Consumable materials and parts which are subject to
natural wear and tear
EN 17