Memory Functions - smartheart 01-508 Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory
Select the desired user to review, 1
or 2
. The user icon displayed represents the
memory bank where the measurement result will be
stored. When the monitor is OFF, press and release
the SET button to toggle between user 1 or 2.
This monitor stores and recalls up to 60 readings in
per user. These measurements can be shared with
your physician or trained healthcare professional.
1. Press and release the MEM button. The unit
will first display the average of the last three
measurements, Fig 1.
2. Press the MEM button again to begin scrolling
through the saved measurements. Measurements
will appear on the display from most current to
oldest; the memory number will appear on the
lower left corner.
3. All results for a given measurement will display, including measurement
results, pulse rate, Hypertension Indicator and Irregular Heartbeat
alert (if applicable). The date/time stamp will cycle on the lower left—
memory number, time, date, repeat, Fig 2.
4. When the number of readings exceeds 60 , the oldest data will be
replaced with the new record.
5. Press START/STOP to turn the monitor off at any time during review
of the stored measurements.
Fig. 1
Fig. 2
ENGLISH • 19