Gas Pressure Control; Extraordinary Maintenance - Fimar FME Uso Y Mantenimiento

GAS PRESSURE CONTROL

Proceed as indicated.
1 - Close the gas supply faucet.
2 - Loosen the screws and remove
the side panel (L).
3 - Loosen the pressure fitting
screw (M).
4 - Connect the pressure gauge to
the pressure fitting.
5 - Open the gas supply faucet.
6 - Turn on the multi-burner, rotate
the knob to the maximum power
position.
7 - Make sure the pressure indicat-
ed on the gauge corresponds to
the one on the appliance plate.
8 - Turn off the burner, close the
gas supply faucet and discon-
nect the pressure gauge.
9 - Tighten the screw (M).
10 - Reassemble the side panel (L)
and secure it with the screws.

EXTRAORDINARY MAINTENANCE

All extraordinary maintenance such as broken or worn component replacement must
be performed by authorised personnel with specific technical skills and special abilities
in the specific sector.
After maintenance (routine and extraordinary), always make sure that operations were
correctly performed before running the appliance.
M
- 31 -
PIZZA OVENS
(GAS POWERED)
L
IDM-34601500900.tif
English language
GB