GUTMANN Nube Instrucciones De Montaje página 15

Ocultar thumbs Ver también para Nube:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

min. 750 mm. If the manufacturer of the gas
cooking appliance specifies a greater
distance, this must be taken into consideration.
Gas cookers
Comply with the currently valid installation
regulations and instructions of the gas
appliance manufacturers. The extractor hood
may only be installed over gas hobs at a
minimum distance of 750 mm provided the
following nominal thermal loads (Hs) are not
exceeded:
Gas cookers
Load of one hotplate max.
Load of all hotplates max.
Load of the oven
Gas hobs
Load of one hotplate max.
Load of all hotplates
Assembly instructions
Island cooker hood
1 = Mounting hole
2 = Exhaust air hose
3 = Electrical connection
4 = Upper tower
5 = Lower tower
6 = Hood
7 = LED power display
3.0 kW
8.3 kW
max. 3.9 kW
3.9 kW
max. 11.3 kW
en
1. (For extraction mode) Prepare a suitable
exhaust air guide in the ceiling.
2. Specify the operator side of the hood on
the side having the LED power display.
3. In order to achieve an optimum extraction
capacity, define the position of the extractor
hood in the middle above the hob (use a
plumb-line for assistance) and mark the
central point of the tower on the ceiling.
4. Mark the position of the mounting holes
using the drilling template.
en

Publicidad

Tabla de contenido
loading

Tabla de contenido