Environmental Information - GUTMANN Nube Instrucciones De Montaje

13. Lift up the extractor hood and push it into
the upper tower, so that the prepared oblong
holes in the upper tower align with the
mounting holes on the module. Fasten the
extractor hood to the upper tower using the
enclosed M5 screws. Align the total hood
height to the horizontal before tightening the
screws.
14. By removing the adhesive tape, loosen
the lower tower and pull down until it is
positioned on the hood
15. Carry out a function test
16. For the version with recirculating air,
observe the operating instructions for „active
carbon"
Disposal Packaging
The appliance packaging is recyclable.
Cardboard and polyethylene film (PE) are
used as packaging material. These materials
must be disposed of in an environmentally
friendly manner and in accordance with the
currently valid on-site regulations

Environmental Information

This appliance is labelled in accordance with
European Directive 2002/96/EG conceming
used electrical and electronic appliances
(waste electrical and eleclronic equipment -
WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Please ask your dealer about current means
of disposal.
en