Initial Operation - Winix NK305 Manual Del Usuario

INITIAL OPERATION

① Insert the power cord into an electrical
outlet.
② Press the 'Power' button.
• During the first 4 minutes of power up, the Air Quality
Note
Indicator will flash as the Smart Sensor measure the air quality
in the environment, after which normal operation will begin.
③ By default, when the unit first powers
on, the mode will be set to Auto with
PlasmaWave
• When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
• PlasmaWave
airborne contaminants.
• In Auto mode, as the indoor air quality improves, the fan
Note
speed will automatically be reduced to Low.
• When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
failure. To disable PlasmaWave
English
®
enabled.
®
works to remove harmful
®
, it is normal and does not signify product
®
, see page 13.
NK305 11