miniJOULE Island MJI-1500-01 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The backlight will turn off automatically, how to set the backlight?
Press and hold the ON/OFF power button for approximately 3 seconds, all indicators will
be illuminated or off (The status will be changed to opposite) when buzzer beeps. After
that, the display is set to turn off the backlight manually.
Press 3 second: Turn on the backlight
Note: Real color of display is blue.)
(
1.2
Battery:
instantaneously After completing self-test the internal battery actual voltage will be displayed
when the inverter is turned on. However, it will not be displayed at single charge mode.)
1.3
Output:
displayed . ( Self-test shows 8.88 KW instantaneously. After completing self-test,
the total AC & DC output power will be displayed when the inverter is turned on.
However, it will not be displayed at charge mode)
1.4
Input:
w
test shows 888W instantaneously. After completing self-test, the total charging power will be
displayed at charge mode. However, it will not be displayed at inverter mode.)
1.5
Error:
: Error code will be displayed. (see "Trouble Shooting on page 4-2")
1.6
: Remaining working time of the battery will be displayed.
NOTICE
:
discrepancy between the display and the actual working time if you used other
kind of Lead-acid battery.
%
1.7
: Percentage of battery capacity will be displayed.
NOTICE
:
happened.
If solar input power is not available, the remaining time is not so much.
If the percentage of battery capacity is low.
If Error code "E05" is displayed.
1.8
: Solar charging indicator
When connecting to the solar panel, the indicator will be illuminated, the backlight will be
illuminated for 5 seconds and the buzzer beeps.
2-2
v
: Battery voltage will be displayed.
kW
: Total output power of AC inverter and DC terminal will be
: Total input power of solar and AC charger will be displayed. (
Remaining time is calculated based on 100Ah battery. There will be
Please charge the battery immediately, if one of following conditions
Press 3 second: Turn off the backlight
( Self-test shows 88.8V
Self-

Publicidad

Tabla de contenido
loading

Tabla de contenido