miniJOULE Island MJI-1500-01 Manual De Instrucciones página 25

Table 4-1 Error Codes for Troubleshooting the MJI-1500-01
Error Code
Description
Displayed
of Error
Car lighter
port #2 fused
Car lighter
port #1 and
port #2 fused
NOTICE : If different errors occur at the same time, E08, E09 and E10 will be
displayed with high priority. Other error codes will be displayed only after the
error resolved and restart the system.
Description
of Error
Description of Condition
No AC output Everything is working well,
but no AC output only
Please note that RCD should be disconnected from the circuits prior to carrying out
any insulation tests.
Description of Condition
DC lighter plug output current is more
than 15A,
Backlight appears to be pink
color flashing, and alarm continues
until the fuse is replaced.
DC lighter plug output current is more
than 15A,
Backlight appears to be pink
color flashing, and alarm continues
until the fuse is replaced.
Resolution
Replace fuse.
Reduce the load to DC
lighter plug
Remove the output
short-circuit.
Replace fuse.
Reduce the load to DC
lighter plug
Remove the output
short-circuit.
Resolution
Press "RESET" button of RCD
4-4