miniJOULE Island MJI-1500-01 Manual De Instrucciones página 13

WARNING:
Please note that RCD should be disconnected from the circuits prior to carrying out
any insulation tests.
TEST BUTTON
The RCD should be tested (as below) each time before use.
Testing Procedure
1) Switch off the device
2) Press the reset button
3) According to the test, to see whether the release of the reset button
4) If trip, you can use it. Please press the reset button once again.
Note: If you are in any doubt on how to proceed, consulta qualified electrician.
3.3 Fuse set:
3.3.1
3.3.2
3.3.1 Solar input fuse:
3.3.2 DC car lighter output fuses:
3.3.3 Jump start fuses:
3.43 Vent: the vent for inner fan
WARNING
When this system is working, the internal temperature may rise higher, please
keep enough space at least 15cm for heat emission. Keep it away from any
flammable materials, such as blanket, pillow and sleeping bag.
FRONT VIEW
20A/32V DC
2*15A/32V DC
7*30A/32VDC
:
RESET BUTTON
3.3.3
Feature
2-5