recharge will take up to 24 hours.
5. The battery indicator will be dynamically displayed the battery level during
charging stage.
Note: Battery Level Indicator readings will not be accurate until the batteries have
"rested" for 15 minutes after charging.
Charging with Solar Panels
12/24V solar panels rated to produce a maximum of 20 amps can be used to
charge MJI-1500-01 via the solar charging input. To charge with solar panel,
follow these steps:
1. Disconnect any 12-volt DC accessories and turn the AC Outlets Switch off.
2. Plug the provided 25' solar cables into the solar charging inputs correctly.
3. Plug the other end of the solar cable into the output of the provided 60W solar
panels.
4. While the system is charging, the solar charging indicator will be illuminated,
the backlight will be illuminated for 5 seconds and the buzzer beeps. With
direct sunlight, a typical 3.5 Amp solar panel (60W foldable panel)
will take up to 40 hours*.
5. The battery indicator will be dynamically displayed the battery level during
charging stage.
Note: Anti-reverse connectors will make sure the polarity is correct.
A solar panel (PV panel) is made of the natural element, silicon, which becomes
charged electrically when subjected to sun light. The intensity of the Sun's radiation
changes with the hour of the day, time of the year and weather conditions. Measurement
conditions under irradiance level of 1000W/m , air mass 1.5 Spectrums, cell
temperature of 77°F (25°C). Defined as standard deviation of thousands measurements.
Absolute power values depend on the measuring system. They can differ by +/- 5% from
one measuring system to another. The measured charging time is for reference only.
3-6