Making Measurements; Inspection Before Measurement - Hioki CM4141 Manual De Instrucciones

2

Making Measurements

2.1 Inspection Before Measurement

Check if there is any damage to the instrument occurred during storage or shipping and
verify that instrument operates normally before using it. If you find any damage, contact your
authorized Hioki distributor or reseller.
 The battery cover is closed and its screw has
been securely tightened.
 There is no foreign matter on the
measurement terminals. (p. 12)
 The test leads are not broken.
Ω
1 or less
OK
Check item



NO NO
There is no damage to the test lead
insulation, and neither the white sheathing nor
metal conductor inside the wire are exposed.
The instrument is neither damaged nor cracked.
No indicators are missing.
NO
2
(All lit up)
13