Remberg DIS2 Plus Manual De Instrucciones página 42

171 Lower Limit Variable 2

172 Upper Limit Variable 2

173 Constant 2

174 Transmission Delay

175 Reception Timeout

176 Number of Errors

177÷185 Reserved Parameters - Group L
11.m GRUPO M -
186 Timer 1
 
187 Time Base Timer 1
 
188 Action Timer 1
 
189 Timer 2

190 Time Base Timer 2

191 Action Timer 2

192 Timers Sequence

193÷197 Reserved Parameters - Group M
Notes / Updates
1 Display of decimal point depends on setting of parameter
2 On activation, the output is inhibited if the controller is in alarm mode. Activates only if alarm condition reappers, after that it
was restored.
3 Changing the control setpoint, the alarm will be disabled. It will stay disabled as long as the parameters that created it are active.
It only works with deviation alarms, band alarms and absolute alarms (referring to the control setpoint).
42
- Timer

and parameter
 
78
78
78
78
79
79
79
79
79
80
80
80
80
80
80