Tabla De Contenido - moovo XW4 Instrucciones Y Advertencias Para La Instalación Y El Uso

GENERAL SAFETY WARNINGS AND
PRECAUTIONS
STEP 1
- Working in safety!
- Installation warnings
KNOWLEDGE OF THE PRODUCT AND PREPARATION
FOR INSTALLATION
STEP 2
2.1 - Product description and intended use
2.2 - Components used to set up a complete system
STEP 3
Preliminary checks for installation
3.1 - Checking suitability of the environment and gate to be automated
3.2 - Checking product application limits
STEP 4
4.1 - Preliminary set-up work
- 4.1.1 - Typical reference system
- 4.1.2 - Establishing positions of components
- 4.1.3 - Establishing which gate leaf is to mount the gearmotor
with control unit
- 4.1.4 - Identifying "leaf 1" and "leaf 2" on the gate
- 4.1.5 - Establishing the device connection layout
- 4.1.6 - Check all tools required for the work
- 4.1.7 - Complete set-up work
4.2 - Preparing the electrical cables
INSTALLATION: COMPONENT ASSEMBLY AND
CONNECTIONS
STEP 5
- Installing the automation components
STEP 6
- Installation and connections of system devices
6.1 - Setting the control unit for operation on "leaf 2" or to automate a
single-leaf gate
6.2 - Installing and connecting the gearmotor without control unit
6.3 - Installing and connecting flashing light mod. MF
6.4 - Installing and connecting photocells mod. MP
- Selecting operating mode of photocell pair
6.5 - Installing and connecting keypad mod. MK
6.6 - Installing buffer battery mod. MB
POWER SUPPLY CONNECTION
STEP 7
INITIAL START-UP AND ELECTRICAL CONNECTION
CHECK
STEP 8
PROGRAMMING THE AUTOMATION
STEP 9
9.1 - Memorising devices connected by means of "Bus" cable and leaf travel
limit positions "0" and "1"
9.2 - Memorisation of transmitter mod. MT4
9.3 - Programming keypad mod. MK
ADJUSTMENTS AND OTHER OPTIONAL FUNCTIONS
10 - Automation operation adjustment
11 - Memorisation of a new transmitter with control unit "in the vicinity"
procedure
12 - Deleting data from the control unit memory
CONTENTS
TASKS RESERVED FOR QUALIFIED TECHNICIANS
- Connecting the automation to the electrical mains using a cable other than
the version supplied
- Automation testing and commissioning
4
- Product disposal
4
TECHNICAL SPECIFICATIONS OF PRODUCT
COMPONENTS
WHAT TO DO IF ... (Troubleshooting guide)
5
5
Enclosures: "TECHNICAL DOCUMENTATION"
6
6
6
7
7
7
7
7
7
9
9
9
10
13
14
14
15
17
18
19
20
21
21
22
23
23
24
24
24
26
27
27
28
30
I-VII
English - 3