Smartmonitor 2 Features; Top Panel Features; Power Button; Reset Button - Circadiance Smart Monitor 2 Guía De Los Padres

SmartMonitor 2 Features

This section describes the physical features of the SmartMonitor 2
unit.

Top Panel Features

POWER Button

The gray POWER button turns the SmartMonitor 2 on. When you turn
the monitor on, all lights and the alarm come on briefly and the
monitor performs a system test. After a pause, monitoring will begin.
To turn the monitor off do the following:
•
Press and hold the blue RESET button.
•
Press and release the gray POWER button.
•
Wait 2 seconds then release the RESET button.

RESET Button

The blue RESET button resets the alarm lights on the SmartMonitor 2.
It also silences the Memory Full (or Memory Almost Full) and Low
Battery warning alarms. For more information, see the section on
Responding to Alarms. The RESET button also answers a ringing
modem phone call when in monitoring mode.
Remember that the RESET button will not silence patient or loose lead alarms.
SmartMonitor 2 Features
There are two styles of top panels. Illustrated here
are the two different styles.
14