Genie CHAINLIFT 1022 Manual De Instrucciones página 14

I
fiberglass, and sheet meta! must be properly
braced before mounting door opener. Contact
door manufacturer or distributor for a bracing kit.
The Genie Company is not responsible for
damage caused due to improperly braced door:
h'c_m Box 2
.
.
Finding door bracket mounting location.
• Door bracket is mounted as high on door as
possible along vertical centerline and NO LOWER
THAN top set of rollers (Fig. 2-7).
Mounting the door bracket.
• Proper bracing should be verified at this point.
- Align door bracket centered on your vertical
centerline (Fig. 2-8).
- Attach using 3 self-drilling screws for sheet
metal or other light weight material.
- Use lag screws (not provided for solid
wooden sectional doors.
L -_m m m
centerline
centerline
even with or
above top roller
FIG. 2-7 Mounting
centerline of tOP roller
I I
.... T_So ...... oO.-.-
o o o o
i
FIG. 2-8 Examples of door bracket positioning.
NOT_[!: F:o_"soh'd wood d_,)o_'_;c_;_y_,_ge bo _:_;
WTYHOUT SLOT H_YiDS (30 nc uded_ _'? ,_y
a_t,_o be used f_::__;', _ ;_ch_ _7doo_" by:_ck, e _,
co te_/ p ns _oc_}te B_£ 5 h'o£ Box 2
1. Attach the arms.
• Fasten short branch of curved door arm to door
bracket using bolt and locking nut (Fig. 2-9}.
• Fasten straight arm to carriage using clevis pin
and cotter pin (Fig. 2-9).
2. Connecting the arms.
• Slide carriage back and forth to adjust arm length.
- Position the straight arm 50 ° down from the
rail.
• With the arms arranged in this position, fasten
arms together using bolts and nuts spaced as
far apart as possible (Fig. 2-9).
short clevis pin & cotter pin
FIG. 2-9 Attaching door arms.
bolts as far
apart as
possible
4
PN# 36420Supplement, 10/27/2008