Descargar Imprimir esta página

Genie CHAINLIFT 1022 Manual De Instrucciones página 4

Ocultar thumbs Ver también para CHAINLIFT 1022:

Publicidad

Tbngs
to cor_s
der
if y©u
a<e p_ann
_g 'i:©
Do_ t-y©u_"setlL
'_
This
opener
is
designed
for use
with
SECTIONAL
doors
only.
Check your ceiling
where the power
head of your new unit will be mounted.
Plan how you will be mounting
the power head.
It is possible
that ceiling joists may not be in the
position
needed with respect
to the garage
door
opener.
It may be necessary
to add an
additional
bracket
and fasteners
(not included
with your new door opener kit).
(Refer
to Section
2.)
You need a properly
grounded
110-120 Volt
power
supply
available.
The outlet should
be
no more than 3 feet from the power head once it is
mounted.
(Refer to Section
5.)
Check
the wall directly
above the garage
door. The door opener's
header bracket
must be securely
fastened
to this wall. Insure
that the structure
will provide
a strong
mounting
location.
(Refer to Section
2.)
Check to see if the mounting
location
for the Safe-T-Beam ®System is clear from
obstruction
and has a wood surface available
for attaching the mounting
brackets. The
brackets may be attached to concrete if necessary
but extra tools and special fasteners (not supplied)
will be required. (Refer to Section
4 and 5.)
DO NOT USE ALTERNATE POWER SUPPLIES.
To avoid damage
to your door and/or
opener,
make sure you disable
and/or
remove
any door locks, ropes, and/or
cables
(NOT door lift cables)
prior to installing
your
opener.
(Refer to Section
1.)
Insure that your door is properly
balanced
and moving
freely.
(Refer to Section
2.)
Is your sectional
garage
door made of
aluminum,
light-weight
steel, fiberglass
repaired
or adjusted
bya
trained
door
system
or glass panels? Additional
support
bracing
technician:
Door springs,
cables,
pulleys,
must be added to these type doors. If this is the
case, please
contact the door manufacturer
or
authorized
dealer so that they can furnish you
with a "bracing
kit." (Refer to Section
2.)
T° reduce the risk °f injury to pers°ns
or
@
(NOT SHOWN)If
your garage
does not have
a separate
entry
door,
you should
consider
an emergency
release
kit (GER-2)
for installation
on
damage
to property-
Use this opener
only
your garage
door. (See emergency
release
kit
with sectional
doorsl
installation
notes on page 21.)
PN# 36420Supplement,
10/27/2008

Publicidad

loading

Este manual también es adecuado para:

Chainlift 1024Chainlift 1042Beltlift 1022Beltlift 24Beltlift 42