Memory Functions; Recalling Measurements In Memory - smartheart 01-517 Manual De Instrucciones

MEMORy fUNCTIONS

Recalling Measurements in Memory

This monitor stores and recalls up to 90 measurements,
in memory. These measurements can be shared with
your physician or trained healthcare professional.
1. Press and release the MEM button. The unit will first
display the average of the last three measurements,
Fig 1.
2. Press the MEM button again to begin scrolling
through the saved measurements. Measurements will
appear on the display from most current to oldest;
the memory number will appear on the lower left
corner. All results for a given measurement will
display, including measurement results, pulse rate,
hypertension Indicator, Irregular heartbeat alert (if
applicable), and date/time stamp, Fig 2.
3. When the number of readings exceeds 90, the
oldest data will be replaced with the new record.
4. Press POWER to turn the monitor off at any time
during review of the stored measurements.
Clearing Measurements from Memory
From power display off, press and hold down the MEM
button until the display shows Clr, Fig. 3. This indicates
that all measurements have been erased.
Fig. 1
Fig. 2
Fig. 3
English • 17