Electronic Climate Control
1. Clip the climate control knob
outer trim ring panel into the
99-7523S housing.
(Figure A)
2. Align the screw holes in the
climate control and the radio
housing panel then push
the climate control onto the
radio housing panel.
(Figure B)
Kit Assembly
(Figure A)
Rear view of electronic climate control
(Figure B)
99-7523S
3. Secure the climate
control with the factory
hardware removed in step 7
of the dash disassembly for
electronic climate
control cars.
4. Unclip and remove the
small oval cover plate at the
bottom center of the factory
radio and insert into the
99-7523S radio housing.
(Figure C)
Note: The light bulb boards
will not be used with auto
climate control vehicles
disregard these bulbs.
5
(Figure C)