vitra. charles & ray eames 1946 Manual De Instrucciones página 11

EN
FM RADIO MODE
FM SETTINGS
FM
Press the MENU button to access the FM MODE MENU. From here you can set some FM
preferences such as SCAN SETTING and AUDIO SETTING.
FM
SCAN SETTING allows you to decide whether the radio should stop scanning only when it
fi nds a station with a strong signal. <Scan setting >
AUDIO SETTING gives you the option of listening to a station in mono, should the signal FM
strength not be suffi ciently strong to allow stereo reception.
<Audio setting >
AUXILIARY INPUT MODE
AUXILIARY INPUT MODE allows you to play audio from an external source through your
radio.
To do so, connect your external audio source to the 3.5mm AUX IN connector on the rear of
the Eames Radio.
Turn the volume down on both the Eames Radio and, if adjustable, the external device.
Auxiliary Input
Now press MODE until the AUXILIARY INPUT MODE intro screen is displayed.
Auxiliary Input
12: 50: 32
Adjust the volume of the Eames Radio and, if necessary, the external audio device as
required.
11