MISCELLANEOUS SETTINGS
AUTO UPDATE
Update from ANY : Automatically takes time/date from DAB or FM signals. The Eames Radio
needs to have been operated in DAB or FM MODE (and have received a signal) before this
information can be extracted.
UPDATE FROM DAB : Forces the radio to take the time/date from the DAB signal.
UPDATE FROM FM : Forces the radio to take the time/date from an FM signal.
BRIGHTNESS
The Eames Radio allows a degree of control over the brightness of its display, meaning that
both its STANDBY and ON brightness levels can be independently set to HIGH, MEDIUM or
LOW levels.
To change the brightness settings press MENU then select BRIGHTNESS from the menu
list. You will now be able to modify the default brightness level settings for the two modes
of operation - STANDBY and ON. Select the mode you'd like to change from these two
options, then choose your desired brightness level. Your chosen setting will be held in
memory indefi nitely, but can be changed at any time.
The TIMEOUT setting enables control of the length of time it takes for the Eames Radio to
transition from its ON brightness level, to the brightness level when the radio is in STANDBY.
For example, this allows the ON brightness level to be set to HIGH, and the STANDBY level
to LOW, meaning when the radio is turned off and it goes into STANDBY, the brightness can
be set to reduce over a 30 second period down to a low level suitable for bedside/night time
use. Pressing any button or moving either dial will temporarily return the display brightness
to its ON brightness level, allowing the time to briefl y become visible again.
LANGUAGE
The default language on your radio is English, though 3 other languages are supported as
follows:
French
German
Italian
To change the current language setting press MENU then select LANGUAGE from the
MENU, options, then select your choice.
Brightness
<Standby Level >
Brightness
<On Level
>
Timeout
<20 sec
>
DAB
<Language
>
Language
<English
>
EN
17