USER'S MANUAL. PROLITE-40
2
SAFETY RULES
2.1
General
*
The safety could not be assured if the instructions for use are not closely
followed.
*
The external charger is Class I equipment. For safety reasons plug it to a supply
line with the corresponding ground terminal.
*
Use the mains adapter in Over-Voltage Category II installations and Pollution
Degree 1 environments. It is for INDOOR USE.
*
When using some of the following accessories use only the specified ones to
ensure safety:
Power adapter.
Mains cord.
Electrodes.
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 70 V DC or 33 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions.
*
The user is not authorised to manipulate inside the instrument:
Replacing electrodes.
In the Maintenance section provides instructions specific to this intervention.
*
Any change on the equipment should be carried out by qualified personnel.
*
Follow the cleaning instructions described in the Maintenance paragraph.
02-2011
Page 5