Helpful Hints - Singer SE300 Manual De Instrucciones

Ocultar thumbs Ver también para SE300:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

H
H
ELPFUL
INTS
PROBLEM
CAUSE
Machine not properly threaded.
Upper thread
Thread entwined around bobbin.
breaks
Needle inserted incorrectly.
Thread tension too tight.
Lower thread
Bobbin threaded incorrectly.
breaks
Bobbin wound unevenly or too full.
Dirt or lint in the bobbin holder.
Needle inserted incorrectly.
Machine skips
Bent or blunt needle.
stitches
Incorrect size of needle.
Machine not properly threaded.
Bobbin threaded incorrectly.
Blunt needle.
Thread tension too tight.
Design too dense for fabric being
embroidered.
Machine makes
Bobbin threaded incorrectly.
loose stitches or
Machine not properly threaded.
loops
Tension not adjusted properly.
Presser foot is not suited for the pattern.
Hoop or carriage is interferred.
distorted
Thread tension is not balanced.
Threader does not
Needle is not raised to highest position.
thread to needle
Needle inserted incorrectly.
eye
Bent needle.
Machine does not
feed properly
Lint and dust accumulated around feed dog.
Needle is hitting the presser foot.
Needle breaks
Needle inserted incorrectly.
Incorrect size needle or thread for fabric
being sewn.
Machine runs with
Dirt or lint accumulated in the hook race and
feed dog.
Machine will not
Cord not plugged into electrical outlet.
run
Power switch is not turned on.
Presser foot is not lowered.
CORRECTION
Re-thread machine.
Remove entwined thread.
Re-insert needle.
Readjust thread tension.
Choose correct thread.
Re-thread the bobbin.
Rewind the bobbin.
Clean the holder.
Re-insert needle.
Insert new needle.
Choose correct size needle for fabric.
Re-thread machine.
Re-thread the bobbin.
Insert new needle.
Readjust thread tension.
fabric type.
Use proper stabilizer for fabric being
embroidered.
Re-thread the bobbin.
Re-thread machine.
Readjust thread tension.
Attach correct foot.
Remove obstruction.
Adjust the thread tension.
Use proper stabilizer for fabric being
embroidered.
Raise the needle.
Re-insert needle.
Insert new needle.
Raise the feed dogs.
Regulate stitch length.
Clean the feed dog area.
Do not pull fabric.
Re-insert needle.
Choose correct size needle and thread.
Remove the needle plate and bobbin holder
and clean the hook race.
Insert plug fully into outlet.
Turn on the switch.
Lower the foot.
57
19
18
9
14,43
9,45
18
17
56
9
9
9,45
19
18
9
14,43
48
45
18
19
14,43
8
52
14,43
45
20
9
9
12
14
56
21
24-
9
9,45
56
10
10
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Se340

Tabla de contenido